SEALING SLURRY – 2K
Two component Polymer modified highly flexible cement based Waterproofing Membrane (WPM)
SEA STAR SEALING SLURRY-2K is a highly flexible cementitious two-component mortar for waterproofing concrete surfaces, plasters, screeds and cement-based substrates. With high adhesion to substrates, good flexibility and excellent workability it is suitable for the waterproof protection of baths, showers, water tanks, terraces, balconies, swimming pools, canals, before laying tiles, natural stone or glass mosaics.
- BATHROOMS & TOILETS
- WATER TANKS
- SWIMMING POOLS
- BASEMENT WALLS &
- FOUNDATIONS
- BALCONIES
- ROOFTOPS
- UNDERGROUND
- PARKING LOTS
- OTHER WET AREAS
SEALING SLURRY- 2K is a two-component formulated powder containing special cements, selected aggregates, specific additives and special liquid polymer dispersion based on vinyl acetate and ethylene (VAE) to ensure, substrate adhesion, flexibility, water resistance and elasticity.
- Surface must be sound and seasoned, remove any dust or contaminated material, oil, paint, grease, and corrosion etc.
- Seal in advance if any cracks in the substrate by using the SEA STAR CRACK FILLER.
- Wet the surface slightly with the water.
- Pour liquid component (Part A) in a clean container slowly adding the powder component (Part B).
- Mix with an electric mixer at low speed until the mixture becomes smooth and free of lumps.
APPLICATION INSTRUCTIONS
- Apply the solution on pre-wet surface with the use of brush/roller / notched trowel to a depth of 1-2mm.
- Leave the first coat to dry for few hours (depending on weather conditions).
- Apply the second /third coats similar to the first coat to achieve the required thickness.
- Once the final coat is applied, let the surface become dry completely.
- Protect the coated surface from direct sunlight & cover it with damp sheets for 2-3 days, afterwards remove the sheets to enjoy the waterproof surface.
16KGS Bags: (A+B)
Part A (Liquid) : 5kgs bottle.
Part B (Powder): 11kgs bag.
01 pack of SEALING SLURRY-2K (16kg) covers approx. 125 Sqft. surface with two coat application depending on the surface & thickness of coats applied.
Appearance:
Color:
Density:
Solid content:
Viscocity:
Liquid
white
1.07 g/cm3
52,5 – 54,0 %
200-400 mPas
Appearance:
Color:
Max aggregate size:
Powder
Grey
< 0.4mm