Sanded
PRE-MIXED POLYMER MODIFIED, WATER RESISTANT CEMENT BASED SANDED GROUT SUITABLE FOR WIDER JOINTS.
SEA STAR TILE GROUT (SANDED) is a special type of grout that has small particles of silica sand, polymers & binders in it to make it more stronger for wider joints.
USAGE / ADVANTAGES
- CEMENT BASED SANDED GROUT FOR JOINTS 3MM & ABOVE
- ENSURE PROPER ADHESION TO YOUR TIL
- NON SHRINK IN WIDER GAPS / JOINTS
MIXING INSTRUCTIONS
- Mix SEA STAR GROUT (sanded) slowly in clean water until a smooth mixture is obtained.
- Allow the grout to rest for 5 – 10 minutes then mix it again.
Now use the grout immediately.
COVERAGE
- Grout coverage varies with the tile size and joint width.
- Density : 1.1kg/m³
- Yield : A 20kg bag mixed with 4 liters of water yields 15.5 liters of mixed adhesive.
- Toxicity : MULTIFIX – STA300 is non-toxic after cure, and can be safely used in conjunction with potable water.
- Grout coverage varies with the tile size and joint width.
- Density : 1.1kg/m³
APPLICATION INSTRUCTIONS
- Spread the grout between the tiles, pushing it diagonally across the tiles to fit into the gaps completely.
- Care should be taken while grouting as it contains silica sand which can scratch the tile surface.
- Remove surplus grout with a damp sponge with soft hands.
When grouting is completed, clean tiles with dry cloth.
Colours
Additives and metal oxide color pigments to make it in a variety of colours.
Packaging
Only available in 2kg bags.
Storage
Store out of direct sunlight and protect from water.
WATCH POINTS
Grouting should not start before the tile adhesive has dried out completely.
COMPOSITION, PROPERTIES, APPEARANCE
SEA STAR TILE GROUT (SANDED) is a blend of cement, silica sand, hydrophobic polymer contents, cement fillers, additives and metal oxide color pigments to make it in a variety of colors.
