Epoxy Tile Grout
Sea Star Epoxy Tile Grout is a two component floor or wall tile grout developed from epoxy resin, high-end pigment and curing agent. It has a good weather resistance, better and stable product performance and longer service life and has a unique packaging technology patent.
The application is simple and fast, it has a good decoration effect and brings people the ultimate luxury life experience. The product can not change color for 20 years.
For grouting of floor or wall tiles, for the following interior and exterior residential and commercial applications
- Kitchens
- Bathrooms / other wet areas
- Swimming pools
- Hospitals
- Commercial buildings / Malls
- Industrial floors
- Cabinet and furniture gaps up to 10mm
- Chemical name: Epoxy resin, high-end pigment, and curing agent
- Health and environmental protection. No formaldehyde, no toluene, no heavy metals, lower VOC
- Strong yellowing resistance. No discoloration after exposure to the sun for 20 years
- The anti-fungus and anti-mildew grade is grade 0
- Strong weather resistance, suitable for harsh environments from -30°C to 50°C
- High tensile strength, more than 5Mpa
- High hardness and strong abrasion resistance
- Good chemical resistance
- Open the package and put the product into a special adhesive gun.
- Install the mixing nozzle, cut the front end, and punch out the incompletely mixed material in the first 20 cm.
- Start application and fill the joint beautifying agent evenly as soon as possible.
- Compact the tile grout with a blank holder ball or any rubber float.
- Remove surplus materials after curing.
- The material not used up on time during construction can continue to be used under normal sealing and preservation of bottles.
- If the application interval exceeds 15 minutes, the mixing nozzle needs to be replaced.
- If this product comes into contact with your eyes, please wash it with clean water and seek medical advice.
- This product should be stored away from direct sunlight; please keep it out of reach of children.
APPLICATION INSTRUCTIONS
- 400 ml twin cartridges
- 01 mixing nozzle
- 01 rubber float
12 to 18 months from the date of production (see product for DoM)
It depends on the size of the tile, joint width, and thickness of the tile.
-
For 60*60 cm tiles:
- 2mm joint: 01 cartridge covers approx. 10-12 sq. meter
- 3mm joint: 01 cartridge covers approx. 6-7 sq. meter
-
For 60*120 cm tiles:
- 2mm joint: 01 cartridge covers approx. 16-18 sq. meter
- 3mm joint: 01 cartridge covers approx. 9-10 sq. meter
Product must be stored in original, unopened and undamaged packaging in
dry conditions.